2009/04/02 - Perolo launches a complete new range of ball valves
.jpg)
Perolo
We are now able to offer you a wide range of ball valves and footvalves approved by Bureau Veritas.
Most of our products are now complying with a European Norm, required by ADR
2009 Regulations, which will be mandatory for all equipments fitted on new
built tanks starting from July 2010.
Indeed, these products have been checked satisfactory to the approval
type tests prescribed by the related European norm.
Therefore, we are now able to offer you a wide range of ball valves from
ND32mm to ND80mm, including 1,5" BSP and 1,5" flanged new versions, complying
with current European norm EN 14432 rev. 08/2006.
Our new footvalves also got the approval for the NF EN 14433 rev.
07/2006 standards:
- 3" (ND80) NEATFLOW Mk2
- 3" (ND80) and 4" (ND100) CHEMFLOW Mk2 with on side cylinder, down
cylinder or manual command.
We remind you that our other footvalves, including our TWINCO cast
composite design bottom discharge as well as TANKFLY butterfly valves, were
homologated a few years ago.
Please do not hesitate to contact us for any request you may have on
these products.
You will find below all the certficates issued by the Bureau Veritas
should you wish to get further information about these homologations.
Click
here to download the 1,5" (ND32) straight and 1,5" (ND32) flanged
ATCO ball valves certificates.
Click
here to download the 1,5" (ND40), 2" (ND50) and 3" (ND80) flanged ATCO
ball valves certificates.
Click
here to download the 3" (ND80) NEATFLOW Mk2 footvalve certificate.
Click
here to download the 3" (ND80) CHEMFLOW Mk2 footvalve certificate.
Click
here to download the 4" (ND100) CHEMFLOW Mk2 footvalve certificate.
.jpg)
